How to Empty the Debris Cup

Care for your VACDRA mini pocket vacuum cleaner with this illustrated debris cup and filter guide. Switch the device off before removing any attachment.


Emptying the debris cup after each use helps maintain your VACDRA Mini’s suction. It only takes a minute.

Step 1: Power off

Press the power button to switch off the VACDRA Mini before you start.

 Step 1: switch off the VACDRA Mini with the power button

Step 2: Pull the nozzle out

Pull the nozzle straight up and off the top of the device.

  Step 2: pull the nozzle out of the VACDRA Mini

Step 3: Unlock the debris cup

Turn the transparent debris cup in the unlocking direction shown on the device and in the user manual. Do not force it.

  Step 3: turn the debris cup in the marked unlocking direction

Step 4: Lift the cup off

Tip: turn the device upside down before you open the cup, so the debris does not pour out.

  Step 4: lift the debris cup off the VACDRA Mini

Step 5: Empty the cup into a bin

Turn the cup over a bin and empty the debris in a bin.

  Step 5: pour the debris from the cup into a bin

Step 6: Brush the filter clean

Use the separate cleaning brush to gently remove dry debris from the filter.

  Step 6: brush the stuck debris off the filter

Put it back together

Place the cup back on the body and turn it in the marked locking direction until secure. Then push the nozzle back in.


Tips

  • Empty the debris cup after every use for the best suction.
  • If the cup or the filter is very dirty, you can rinse them with water. Let them dry completely before you put them back, and never refit a wet filter.
  • If the suction feels weak, empty the cup and clean the filter first.
  • Never run the VACDRA Mini without its filter.
  • The VACDRA Mini is for dry debris only. Do not vacuum liquids and do not immerse the device in water. Only the debris cup and the filter can be rinsed.  



Need help?

Email us at support@vacdra.com and include your order number.


Get in Touch